The combination of castings and steel in this range permits a great diversity in size and strength whilst retaining style elements from some of our cast bollards.The composite method of manufacture allows a greater degree of flexibility of design. These bollards can be customised by moving or adding features such as extra rings or introducing height changes to the standard shown.
All composite bollards are available in three standard heights: 750, 900 and 1100mm. The standard root depth is 300mm but this can be varied to suit ground conditions.
All steel is fully galvanised to BS729 prior to the application of primer paint or two pack epoxy acrylic top coat. Bollards may be customised by the use of logos, crests or wording in order to incorporate features such as parking restrictions and other small information plaques. Reflective tape may be added to bollards to give high visibility in vehicle headlights.
Types 1501 - 1503 are budget bollards and are available at extremely competitive rates. All have a body diameter of 114mm and are available in heights of 750, 900 and 1100mm. Root depth is 300mm. We can supply with or without the loose fitting cover plate type 1550.
|
|
|
|
|
|
|
|
|
|
|
|
|
All are available in three diameters and heights of 750, 900 and 1100mm. Root depth is 300mm. We can supply with or without the loose fitting cover plate type 1550.
|
|
Diameter 168mm, height 930mm, root 360mm.
|
Loose fitting cover plate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tel: 01335 300234
