Cast iron seating

Our seats are 1.8m long as standard and have been ergonomically designed to give a comfortable seating position. Other sizes are achievable, most commonly 2.4m and 3.6m. In these cases an intermediate centre leg is utilised.
All timber (managed forestation hardwood as standard) is treated prior to delivery with 2 coats of Sikkens HLSO wood preservative. Standard timber is Iroko but alternatives are available including European Oak, Ash, Sapele, Utile and Western Red Cedar.
Cast ends are supplied in the more popular cast iron. Alternatively ductile iron and aluminium are also available. For the majority, a cast iron seat is normally robust enough for all but the most demanding situations. Every seat supplied as standard is fully finished with metal/castings painted using our airless spray two pack epoxy acrylic system, in the full BS or RAL colour range.

511			Cast iron Depth: 562mm Height: 860mm Also available as 511HD with thicker timber slats or steel slats
512			Cast iron Depth: 570mm Height: 490mm
513			Cast iron Depth: 870mm Height: 460mm
521			Cast iron Depth: 540mm Height: 795mm
551			Cast iron Depth: 475mm Height: 760mm
571			Cast iron Depth: 670mm Height: 900mm
580			Cast iron Depth: 450mm Height: 880mm
581			Cast iron Depth: 550mm Height: 850mm
582			Cast iron Depth: 550mm Height: 750mm
583			Cast iron Depth: 550mm Height: 800mm Also available without armrests
590			Cast iron Depth: 740mm Height: 850mm