A range of complementary composite bollards are available to guard against ram raiding. Bollards can be strengthened as standard using our 199 and 199x reinforced anti ram cores or simply specified with a 10mm thick wall thickness.
When used as a security bollard we would recommend a minimum of 1m above ground with a minimum of a 500mm deep root. Using 10mm wall thickness gives unparalleled performance, the material alone at 168mm diameter will absorb a spot impact of some 30 tonnes, subject to suitable ground conditions, (we recommend you take the advise of a structural engineer and design with this in mind). Castings on these bollards are purely decorative and not structural.
A range of heights and diameters are available, see below for further information.
Please click here for details of how to install our range of composite security bollards.
All have a body diameter of 114mm and are available in heights of 750, 900 and 1100mm. Root depth is 300mm. We can supply with or without the loose fitting cover plate type 1550.
|
|
Diameter 168mm, height 930mm, root 360mm.
|
Loose fitting cover plate
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
