Timber and steel seating

CIS Swiss Flower benchOur new range of Swiss Flower seating is turning heads – the double and single style benches are constructed from stainless steel and mahogany.

539a 539 stainless steel and timber benches The Swiss Flower double bench is constructed from stainless steel and mahogany. It has two 6mm thick flower shaped side structures linked with a 42mm top rail acting as a handrail.

The 30mm x 90mm mahogany slats are fastened through hidden anti-theft stainless steel screws. The wooden slats assembly and fastening system has been designed so that a slat can be replaced easily. The benches should be fixed to a reinforced concrete plinth with stainless steel bolts and nuts.

Height: 1000mm
Depth: 1000mm
Length: 1800mm

539b 539 stainless steel and timber bench The Swiss Flower single bench is constructed from stainless steel and mahogany. It has two 6mm thick flower shaped side structures linked with a 42mm top rail acting as a handrail.

The 30mm x 90mm mahogany slats are fastened through hidden anti-theft stainless steel screws. The wooden slats assembly and fastening system has been designed so that a slat can be replaced easily. The benches should be fixed to a reinforced concrete plinth with stainless steel bolts and nuts.

Height: 1000mm
Depth: 1000mm
Length: 1800mm

534 Simple utilitarian, steel and timber seats are available as shown and are a more cost effective alternative to cast and timber. All steel is galvanised to BS729 prior to painting in 2 pack epoxy acrylic paint. A full RAL or BS colour range is available.
589

A robust timber and steel box section seat. All steel is galvanised before painting in two pack acrylic paint. Seat timber is treated Ash hardwood as standard, but other types of hard or softwood are available. Relatively low seat height and rounded timber slats make it ideal for use in schools and colleges.

Height: 395mm
Length: 1800mm
Depth: 380mm

Legs are 60mm x 60mm box section, timber slats 100mm wide x 35mm thick x 1800mm long

Click here for installation details

Installation


Wanton vandalism like this is easily prevented by following our simple installation guidelines.


These two options indicate typical fixing arrangements although others may be accommodated.
The suggestions are for non-specific applications only as individual service and site conditions may necessitate other methods of fixing.
Please consult our Technical Department for advice.

Anti – theft seat fixings can be supplied as shown. Dependant upon the site you may chose either two per seat (diametrically opposed) or four (one per leg) for higher security.
Should the seat need to be removed for any reason, then it will be necessary to drill out the retaining bolts on site.