Kerb protection

The 193 kerb protection bollard has been developed with leading local authority engineers as a method of preventing vehicles coming into contact with railings and pedestrians.
However as this bollard is manufactured in ductile iron, it is almost unbreakable!
Sitting like an iceberg with most of the bollard below ground level it is quite inconspicuous and would give excellent levels of protection against ram raid attacks and prevent unauthorised entry to public buildings or businesses.
When used in a security situation we would recommend placing at intervals no greater than 1.1m.
A row of these bollards would be a very effective cordon and protect against all but the strongest of attacks.


Just the situation our 193 bollard is designed to prevent.

193

Height above ground: 540mm, Base: 300x600mm, Root: 500mm
Careful design led to an almost iceberg-like shape, transmitting loads across a wide area. Casting in ductile iron makes it virtually unbreakable.
PDF technical data sheet DS193 datasheet (right-click if you want download it).
top
Testimonial

DRD Roads Service, N. Ireland
Just a short note to confirm that we have completed installation of two more Type 193 bollards at a new zebra crossing in Kilrea, Co. Londonderry.

Again they have already proved successful in protecting railing and kerbing from overrun at a tight radius junction.

The two we first installed in 2006 are still performing well at the site in Coleraine and we have never had any railing damage.

They really are a great product.
Senior engineer, Traffic Section

Lifetime guarantee of Pavement Protection Bollard

CIS Street Furniture offer a lifetime guarantee on its type 193 kerb protection bollard when installed by ourselves. This offer does not affect your statutory rights. Guarantee is against breakage or uprooting of the product in normal working conditions (once fitted and after all concrete is fully cured). Certificate of installation to be provided with any claim. Guarantee covers a replacement bollard but does not include re-installation of the new product.

Click here for installation details

Bollard 193 has been designed to deflect lorry trailer wheels, thus preventing them from mounting kerbs and damaging railings or pedestrians.
The bollard kerb face profile suits standard half batter kerbs to BS 7263 part1:1994. This bollard should only be used as part of the kerbline, (as shown opposite) and should not be set back within the paved area beyond the kerb.
Lifting eyes are cast within the bollard to facilitate easy site lifting via fork lifts, hiabs or similar vehicles. Care is required when handling, as this bollard weighs in excess of 200kgs.

top